Hi all,
I have an original Savage 25 that i have not ran for well over a year. i was going to try to resurrect it as my son is interested in learning about nitro cars. everything worked well last time i drove it. So if you could help me with the following:
1) I am pretty sure i will need a new motor, so any recommendations would be appreciated. im not trying to break the bank or have a hopped up race truck. i just want decent performance and reliable.
2) What other things do you think i will need to replace/ rebuild?
3) I know I need a clutch as well so recommendations on one?
Rising from teh grave
Moderator: Moderators
-
- Savage Newbie
- Posts: 1
- Joined: Mon Feb 20, 2012 12:00 am
As far as a good motor, I have always liked the Dynamite motors. Not the fastest most powerful out there, but they run well.
If you have a 3 shoe clutch, just get some Maxlife shoes. Be sure to sand the inside of the bell until it's clean before you assemble it.
If you have a 3 shoe clutch, just get some Maxlife shoes. Be sure to sand the inside of the bell until it's clean before you assemble it.
Link: | |
BBcode: | |
HTML: | |
Hide post links |
-
- Savage Extraordinaire
- Posts: 701
- Joined: Sun Jan 13, 2013 12:00 am
- Location: N.Kansas City,Mo.
X2 on the Dynamite motors, i had one in a older sav25 w/ a 2spd tranny and I was getting 2nd gear wheelies
Move or I'll run over you.
Savage XL nirto on 25TVP's
Traxxas Rustler 3.3 nitro
Intech ERSC-10,full mods
Traxxas Slash 4x4 highly modified
Axial SCX10 73' Bronco full mods,Holmes Hobbies
Axial SCX10 Comanche
VXL MERV
Savage XL nirto on 25TVP's
Traxxas Rustler 3.3 nitro
Intech ERSC-10,full mods
Traxxas Slash 4x4 highly modified
Axial SCX10 73' Bronco full mods,Holmes Hobbies
Axial SCX10 Comanche
VXL MERV
Link: | |
BBcode: | |
HTML: | |
Hide post links |
Who is online
Users browsing this forum: No registered users and 8 guests